Model Number: YL-0108V
Brand Name: Shenzhen
Key Specifications/Special Features:
Introduction:This product distributes 1 way HDMI signal from STB, DVD, notebook, D-VHS and HD-player and more, to 8 ways identical HDMI signal simultaneously. It supports 3D HDMI and HDMI1.4 (4Kx2K)Specifications:Power supply: 5V DC/3A
Input port: HDMI connector X1
Output ports: HDMI connectors X 8
Power port: DC 1.8mmx1
Power indicator LED: orange LEDx1
Signal indicator LED: blue LED X8
DVI specification: compliant DVI specification 1.0
HDMI specification: HDMI specification 1.4A compliant
HDMI HDCP: compliant with HDCP Rev 1.3 specification, supports HDCP repeater
Frequency range: 25MHz-340MHz
Max transmission: 2.4Gx3=10.2Gbps
Color depth: supports 12-bit deep full HD, full 3D and 4Kx2K video
Audio: supports standard audio and DSD(direct stream digital) audio and HD(HBR) audio
Supported HDMI resolutions: 480I@60Hz, 480P@60Hz, 56I@50Hz, 576P@50Hz, 720P@60Hz, 3D HDMI (720P@50@60Hz, 1080P@24Hz), 3840X2160P@24Hz
Dimensions: 213X80X19mm
Net weight: 390g
Color: black
Working temperatures: 0-60 degree
Safety notes:
- Use DC5V power supply only. Make sure specification matched if using adapters not supplied by factory
- Put this production in dry and ventilated place for normal heat dissipation
- Keep this products away from strong static and magnetic environment
Installation requirement:
- HDTV or other display with HDMI port
- HDMI video source, such as DVD, PS3, STB, PC and more
- High standard HDMI cable (can support HDMI1.4)
Installation steps: please connect the devices according to the above image and operate as following steps:
- Connect the HDMI video source output port to the splitter input port by HDMI cable
- Connect the splitter output port to HDMI display by HDMI cable
- Set the TV input to right HDMI channel
- Power on the splitter (power indicator LED with light on in red)
Operation notes:
- Before output HDMI signal, the splitter will read EDID information of connected TVs and send it back to HDMI source part to let it determine the output mode
- Indicator LED shows the working status
- Power supply larger than 5V will damage product
Trouble shooting:
- No image output
- Check and make sure all connections are good and correct
- Check and make sure the TV has been set up to the right channel
- Check if the matched output
By certification [File Integrity]
